• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 50 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

BQ76905: Cannot communicate via I2C between STM32L5xx and BQ76905.

BQ76905: Why there is 10M resistor and TVS in DSG gate side?

Beida Song
Prodigy 630 points
Part Number: BQ76905

Tool/software:

Hi Expert,

Why there is 10M resistor and TVS in DSG gate side for TI EVM?

  • 0
    TI__Mastermind 42060 points

    Hello Beida,

    There is no TVS in this image. I recommend to read the difference between TVS and Zener diodes online to get an idea on how they differ.

    There is no Zener/10-Meg on DSG because we did not believe these are necessary as we do not expect high transients here.

    Best Regards,

    Luis Hernandez Salomon