LM5066I: MOSFET not turning on or not receiving power.

LM5066 EVAL.zip Guide the below PGD Error ,I set all the parameter as per calculation ,Please help to solve this error. I am attaching the Zip file for the reference.

Please capture the following signals during start-up in a single scope-shot.

VIN, VOUT, GATE, and TIMER

Please give me the brief idea, already attached the telemetry

Please guide the PGD error, How to set the feedback resistor value using the design tool.

Thank you ,I refer the section but I get a error. I am attaching the image with this message. The right -hand side of the LM5066 the PGD pin is getting a red error. How to solve this error? Why does this happen?

consider,

1.Checking the PGD pin's function and configuration.

2.verifying connections and voltage levels.

3.Consulting the LM5066 datasheet

I am using the evolution board for the testing .so i didn't share the schematic please guide the another way to solve this PGD error .I am checking the all parameter like the VIN,VOUT,GATE AND TIMER