Tool/software:
Hello,
our customer has a question about how to set the output voltage by internal feedback divider. I checked in datasheet and GUI, thenfound out
VOUT=VOUT_TARGET1_MSB[3:0] VOUT_TARGET1_LSB [7:0] x 0.02, if SEL_DIV20=1'b
VOUT=VOUT_TARGET1_MSB[3:0] VOUT_TARGET1_LSB [7:0] x 0.01, if SEL_DIV20=0'b
For example if VOUT_TARGET1_MSB[3:0] VOUT_TARGET1_LSB [7:0]=336'h, SEL_DIV20=1'b VOUT=16.44V.
The customer looks confused the GUI presented "VOUT_TARGET1_LSB [7:0]=Offset+1.08V" in this example.
Best regards,
