BQ35100: What to do if battery is disconnected?

Matthew Underwood

Part Number: BQ35100

Tool/software:

I know that the battery is not supposed to be disconnected, and if it is you are supposed to hit NEW_BATTERY. However, for completeness' sake, what would be the best procedure to follow if the battery were unplugged and plugged back in after dropping lower than fully charged?

3 months ago

0 Alan Frias 3 months ago

TI__Mastermind 31360 points

Hello,

This question has been assigned and will be reviewed when possible, please attach your .log /.gg files associated with the project.

Thank you,
Alan

0 Diego 3 months ago in reply to Alan Frias

TI__Mastermind 29365 points

Hi,

What gauging mode are you using?

Regards,

Diego

0 Matthew Underwood 3 months ago in reply to Diego

Prodigy 90 points

EOS Mode.

0 Diego 3 months ago in reply to Matthew Underwood

TI__Mastermind 29365 points

Hi,

For EOS mode, insert a new battery and send the NEW_BATTERY cmd, if the battery gets disconnected and reconnected, you will not need to send the cmd again.

Regards,

Diego

Power management

Power management forum

BQ35100: What to do if battery is disconnected?