Tool/software:
您好,看到这个芯片主要是故障检测功能,但是我运用不到,我就想单纯当作恒流源,仅仅是用到了线性调压和0-250MA范围电流输出,请问那两个故障检测引脚怎么处理呢
Tool/software:
您好,看到这个芯片主要是故障检测功能,但是我运用不到,我就想单纯当作恒流源,仅仅是用到了线性调压和0-250MA范围电流输出,请问那两个故障检测引脚怎么处理呢
replies will be delayed due to China Holiday
Hi xiyang,
if you want to disable the diagnostic function, please connect the DIAGEN pin to GND, and leave the FAULT pin open. Thanks!