• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 62 subscribers
  • Views 334 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC2809 UCC3809 looking for an eval board

George Biner (Arrow)
Intellectual 705 points
Other Parts Discussed in Thread: UCC2809-1, PMP, UCC3809EVM

Are any EVMs or PMP's offered for the UCC2809-1 (or 3809)?  I can't find an EVM, and there is a big list of PMP's here  http://www.ti.com/product/ucc3809#toolssoftware  but I don't know if any are availabile to customers.  EAU is 5k.  Thanks.

George Biner, Arrow FAE

  • 0
    TI__Genius 15910 points

    Several years ago I made a 10W flyback EVM with this device (to go with the User guide listed in the product folder).  I am investigating why it has dissappeared and will get back to you.

  • 0 in reply to Lisa Dinwoodie
    TI__Genius 15910 points

    For some reason the UCC3809EVM association setting was incorrectly set so the web page no longer displayed this EVM in the product folder.  This setting has been restored and the EVM should be shown as orderable tomorrow.  I found a spreadsheet that shows there are 33 EVMs in inventory so you should n't have a problem getting one (after the website update).