For LM3880-Q1, please share the logic levels VIH and VIL for enable pin and FLAG out pins VOH. For FLAG out pins VOL is provided as 0.4V in datasheet.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
For LM3880-Q1, please share the logic levels VIH and VIL for enable pin and FLAG out pins VOH. For FLAG out pins VOL is provided as 0.4V in datasheet.
Hi,
The expert for this device is out of office. I will search for this information, but may not be able to answer until they return on Monday (10/27).
Regards,
Troy
Hi
It was listed in the data sheet:
1. For the EN, the min EN threshold is 1.0V. so everything below 1.0V is not considered HI
2. the FLAG is a open-drain output, the VOL is max at 0.4V. for the VOH it is up to the external pull-up source
Regards
Yihe