• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 138 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61094: PSpice simulation requests

Kazuhiko Hirano
Genius 16038 points

Part Number: TPS61094

Hello,

My customer was not able to simulate TPS61094 PSpice model.
(Please refer to the following E2E thread. https://e2e.ti.com/support/power-management-group/power-management/f/power-management-forum/1580323/tps61094-pspice-simulation-does-not-go-well/6094904 )

Instead, they are asking TI expert to simulate it according to the attached Powerpoint file.

According their requests, could you do the seven PSpice simulations and provide the results, please?
Or could take test data using the EVM instead?
TPS61094 Pspice simulation requests.pptx 

Best regards,

K.Hirano

  • +1
    TI__Mastermind 19810 points

    Hi,

    Regarding the simulation mode, please continue to contact PSpice for TI for assistance. Alternatively, you can try using it on your own computer to see if it works correctly. I'm also using the same software model downloaded from the TI website.

    We don't have the same capacitor models as the customer's input and output capacitors. So, ideally, the customer could use our EVM for more testing based on their BOM. The simulation model is simplified and should only be used as a reference. The actual results should be taken as the standard. Could you help the customer apply for some EVM samples from our website? 

    Could you also provide some specific information about your clients? For example, their applications, annual usage, and mass production timeline. We need to know more about our clients as well.

    Thanks.

    Aurora