• State TI Thinks Resolved
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 33 views
  • Users 0 members are here
Support feedback
Options
Options
Related

TPS2HCS10-Q1: TPS2HCS10-Q1 output hold issue confirmed

Alon Chen
Intellectual 555 points

Part Number: TPS2HCS10-Q1

Hi Team,

After the MCU resets and restarts, can the output state of the TPS2HCS10-Q1 chip remain unchanged? Please help me check, thank you.

  • 0
    TI__Mastermind 33610 points

    Hi Alon,

    If there are no SPI transactions or state changes, then the device will keep operating as expected/unchanged, so the device will operate as expected if the MCU resets and restarts or doesn't have any SPI communication otherwise.

    The device's state can also be controlled via the LHI pin/Limp Home Mode.

    Does this help?

    Thanks,

    Patrick