• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 61 subscribers
  • Views 181 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Simple USB power management Q.

Mohammad Ali Koteich
Intellectual 365 points
Other Parts Discussed in Thread: OMAP-L138, TPS2068, TPS2087

Hi

I'm desiging a PCB based on the OMAP-L138. Looking at the Hawkboard schematics, I see they did the following for the USB powermanagement:

http://img823.imageshack.us/img823/3200/hawkusb.png

Now I'm not experienced with power management at all, but my question is: Is there any rational reason for why they're using a seperate switch (TPS2068) for supplying the VCC_5VD net instead of just utilizing the IN1-OUT1 ports on the TPS2087???...

Well the only reason I can see is if the TPS2087 limits the current (I'm starting to think that is the case), since datasheet states a 500mA continous current pr channel. But it also states that "The power switch supplies a minimum of 500 mA per switch." on page 6. I interpret that as "can supply more than 500mA, just not less".. but maybe I'm reading this all wrong?

Thanks for your time!

PS: Maybe there is a better chip out there for this exact purpose which is newer? If that is the case a recommendation of such a chip would be highly appreciated!

-Koteich