• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 61 subscribers
  • Views 204 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27500 Question

Igor Igor
Intellectual 675 points
Other Parts Discussed in Thread: BQ27500

Hi

I have a question on operating BQ27500 from MSP430.

I am able to communicate to it over I2C and able to perform read/write operations with it.

My question is: are BATL_ENABLE/BATL_DISABLE control() sub commands write only or they are read/write.

If they are r/w commands than what value am I expected to receive upon read operation from the register?

Appreciate

Regards