• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 195 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS61310 strobe control

Liang74194
Prodigy 400 points
Other Parts Discussed in Thread: TPS61310

Hi,

To trigger video light and flash, is I2C control independent with STRB0/1 pin?

In other word, could the customer fix STRB outside and trigger video and flash only by I2C?

  • 0
    TI__Expert 7110 points

    Hi Liang,

    the TPS61310 provides the possibility to activate or trigger the LED's via STRB0/1-Pins or via I2C-Command.

    The Datasheet-section Triggering Video Light and Flash on Page 20 describes how to use Trigger by SW and/or HW.

    Best regards,

    Florian