• State Answer Suggested
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 2715 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

surge current

mani13645
Prodigy 20 points
Other Parts Discussed in Thread: TPS40060

HI

i m a student.i have some problem related with power supply.i m using tps40060 buck regulator for vin 48vdc ,ouput 5vdc @ 6A.in example surge current is given for 3.3vdc output .but how can i calculate with this parameter.kindly please also how calculate output ripple voltage.?

thanx

  • 0
    Prodigy 10 points

    Your description is vague. We hardly answer it.

    surge current is not as same as load current, it caused by many reasons like distribution capacitor , initial condition , pcb and etc.

    Ripply voltage depend on the end filter capacitor and its EMS parameter. has lttle relation with surge current.

  • 0 in reply to zhgart
    Prodigy 70 points

    Dear Mr. Zhgart,

    Mr. Mani has stated that he is a student.

    His understanding about the power supplied may be limited.

    I am not sure, if by mistake, he is refering to the In-rush current at switch-on as "Surge Current" which may be due to fully discharged output capacitors.

    It will be best for Mr. Mani to provide his circuit diagram and explain in detail what he is trying to do and what he wants to achieve?

    Thanks & with best regards,

    - Jaykrushna P. Puranik,

    Nasik, Maharashtra State, India.

    Cell: +0091-9370318246, E-mail: puranik.jay@gmail.com