• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 176 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ2050H intial setup

Austin Ekeinde
Prodigy 10 points
Other Parts Discussed in Thread: BQ2050H

5241.BQ2050 Question.doc

I am using the EV2200 evaluation kit to access the BQ2050H. How do I program the initial capacity of the battery to correspond with the LED indicators?

 Thanks

  • 0
    TI__Guru 73830 points

    Austin

    I may not understand your question. Table 2 in the datasheet has the selection tree to setup the device for your pack capacity. You will remove the appropriate resistors shown on the schematic on page 3 of the DM2050H bq2050H Li-Ion Power Gauge™ Demonstration Module document.

    Regards

    Tom