TL5001 PWM Generator

Tim Ferrier

Other Parts Discussed in Thread: TL5001, LM3524D

Hi,

I'm looking to use a TL5001 as an analog-voltage-to-pwm generator. I saw an app note AN292 that explained how to do it with another chip, but I would like to get it to work with the TL5001, due to its lower cost. Any suggestions on how to make it work?

Thanks,

Tim

over 11 years ago

0 JohnTucker over 11 years ago

TI__Guru**** 191445 points

That's a pretty old part. Can you post some more details of your design goals?

0 Anthony F over 11 years ago in reply to JohnTucker

TI__Mastermind 35115 points

I'd like to add the LM3524D is quite a bit more flexible than the TL5001 because you have access to many nodes which are internal to the TL5001. Is there a specific application in AN292 you are trying to use?

0 JohnTucker over 11 years ago in reply to Anthony F

TI__Guru**** 191445 points

Yes, you will have to provide some details before we can be of much assistance.

Power management

Power management forum

TL5001 PWM Generator