This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

soldering considerations for TPS40210

Other Parts Discussed in Thread: TPS40210, TPS40210EVM

Hello, i have a problems for solder TPS40210 with package MSOP-PowerPAD (DGQ) and a solder JBC.

I start the soldering an as the pins are very together make contact.

you have any recommen? exist a alternative package more easy solder than MSOP?

Exist PCB with the TPS 40210 solder and the pins separated normalized for a inch?

What is the solution?

Thank´s, Luis.

  • Hi Luis,

    The DGQ is probably the easiest of the two packages to solder. The best I can recommend is to keep on trying to clean off the solder shorting any of the pins together.

    You could also order the TPS40210EVM for prototyping purposes.

    Best Regards,