Hi All,
Has anyone accessed this device via the I2C bus. I cannot find any information relating to how to use the interface for accessing the registers - doesn't appear to be covered in the datasheet.
What I need to know is this:-
Is the first byte following the I2C address the internal register address.
Does this auto increment - ie if I read 2 bytes is the data from adjacent registers.
To read a register, must I write the address word first, or do I just read out the whole block.
- Very surprised I can't find this info, so if it is there please direct me!
(Otherwise I assume people just use this in default mode).
Rob Weekly
Microdex.