Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 229 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM2594HV-ADJ Coil selection

Roel Lenssen
Prodigy 10 points

Hello, I'm designing a power supply with the LM2594HV-ADJ.

Vin = 56V, Vout = 24V, Iout = 0.5A.

The datasheet gives a 330uH value for the coil.

The webbench tool gives a 680uH value for the coil.

What's the best value?

Regards,

Roel Lenssen