Dear TI
Customer needs 44kHz of tone signal in TPS65233.
Is it avalable to make 44kHz tone signal by external parts or any setting in TPS65233?
When I see on datasheet, it seems it's not avalable.
Best Regards
K.Narisawa
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear TI
Customer needs 44kHz of tone signal in TPS65233.
Is it avalable to make 44kHz tone signal by external parts or any setting in TPS65233?
When I see on datasheet, it seems it's not avalable.
Best Regards
K.Narisawa
The tone frequency can be up to 44kHz. TPS65233 didn’t specifically limit the frequency, it only identify the EXTM signal shape/amplitude.
Jennifer
Dear Jennifer-san,
You mean when 44kHz tone signal put into EXTM pin, it's avalable. Is this correct?
May I ask other question?
Is SN1303050RTER device also your response?
Thank you for your kindly help.
Best Regards
K.Narisawa
SN1303050 belongs to the SWIFT product line. You can post your questions in a new thread.