Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 496 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS65137 phase margin

KIYOSHI NARISAWA1
Expert 1510 points
Other Parts Discussed in Thread: TPS65137

Dear TI

Could you show me the phase margin how should I consider like TPS65137 which is closed feed back loop inside generally?

Sorry ,I don't have enough knowledge like this device.

Thank you and best regards

K.Narisawa

 

  • 0
    TI__Guru 61255 points
    Hello Narisawa-san,
    With a closed loop system you just can have a look to the load transients. In the application note "Simplifying stability checks" you can find the details about such a test.
    Best regards, Brigitte