• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 592 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

PTH08T240W SMARTSYNC input wired to 3.3V DC

Rolf Mogster
Prodigy 65 points
Other Parts Discussed in Thread: PTH08T240W

Can the Smartsync pin be wired to 3.3VDC?

  • 0
    TI__Mastermind 38230 points

    Roff:

    PTH08T240W smart sync. pin is  recommended to  be grounded if not used .

    Any external DC voltage (bus  noise ) applied to smart sync.  can force the sync. function to be erratic and unstable operation.

    Ground the sync. pin, if not used .

    Tom