Hello,
Please tell me about TPS2041.
When the voltage of IN and OUT is "VIN < Vout",
does the Reversed Current be flowed from OUT against IN via the body diode of FET?
Best Regards,
Kei
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
Please tell me about TPS2041.
When the voltage of IN and OUT is "VIN < Vout",
does the Reversed Current be flowed from OUT against IN via the body diode of FET?
Best Regards,
Kei
Hello Kei,
Please see the discussion in this link http://e2e.ti.com/support/power_management/power_interface/f/204/p/410119/1454923#1454923
This applies to all of TI's USB switches. The block current in both directions when the enable pin is de-asserted.