o-10V dimming control solution

Mac Chen

Intellectual 590 points

Other Parts Discussed in Thread: TPS92210, PMP6023

Dear Sir,

I'm looking for a lighting solution which can use the 0-10V control to drive Vout 48V 1.2A (60W) @AC 90V to 305V.

I found the TPS92210, and it also has a TI design for 25W, 0-10V dimming solution.

http://www.ti.com/tool/PMP6023

Does it work out with 60W LEDs ? or Do you have any suggestion for the 60W application ?

Thanks.

MK.

over 9 years ago

0 David Zhang over 9 years ago

TI__Expert 3495 points

Mac:
You can use the 0-10V dimming interface circuit for the 60W design. The reference design PMP6023 is only rated 25W. Please let me know your e-mail address and I will send you a 60W LED design.
David Zhang

0 Mac Chen over 9 years ago in reply to David Zhang

Intellectual 590 points

David,

Thanks. Private email is below
maccsw@gmail.com

0 jagdish controls over 7 years ago in reply to David Zhang

Prodigy 140 points

Pls let me know whether TPS92210 can used for 65W ( 90V, 0.72 A) at 90V - 265 V AC.

Currently I am using it for 45W.

Please help me with the design for the same. My email id is jagdishkolekar@gmail.com

Thanks.

Power management

Power management forum

o-10V dimming control solution