Hi team,
I have a question about TPS62562DRV.
Our DSP TMS320C6748 has an errata which is described from P.22 to P.25 in the following document(SPRZ303H).
http://www.ti.com/litv/pdf/sprz303h
Currently customer is using LDO for the DVDD18. To avoid this errata, I will recommend to use TPS62562DRV as workaround.
Does TPS62562 accept the 140mA leak current form the DSP? I believe there is no problem because the leak current from DSP is less than the switch current limit of TPS62562. Is my understanding correct?
Best regards,
Yamaguchi