This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24091 Power Good (PG) led almost-on when battery connected

Other Parts Discussed in Thread: BQ24091, LP38693

Hi. I am experiencing a strange problem with BQ24091, when charging a standard single-cell Li-ion battery.

After the first charge cycle (battery is correctly charged up to 4.20v), the power good led turns slightly on even without connecting V_CHG. The measured voltage on TP_3 (between V_BAT and the PG pin) is 1.65v.

The leds behaviour while charging the battery is correct.

Should I put a pull-up on PG pin?