This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM25575 Synchronization?

Other Parts Discussed in Thread: LM25575

Hi, 

According to the datasheet of LM25575, as you can seen in Figure 3, there is about 500 ns delay between CLK signal and the switching on the SW which in practice, I could verify that. My question is that how we can remove this delay? we want to have s synchronization to the clk without any time delay, I would appreciate if you could make it clear?