Dear All,
Let me confirm it about usage of BQ24297.
Please refer to the attached data.
"Usage of BQ24297.pdf"
Our customer is going to perform those using a same 3.3V line.
・ Power supply for microcomputer
・ Power supply for pull-up of BQ24297 (SDA/SCL)
We think that their usage of BQ24297 does not have the problem in particular.
(It does not affect the load transient spec of a 3.3V power line…)
Is our thought correct?
Or will there be any other concern?
Best Regards,
Tsuguhiko Asai
