• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 657 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2115A(TPS2115A-Q1) Settling time

Kenji Itoh
Intellectual 420 points
Other Parts Discussed in Thread: TPS2115A, TPS2115A-Q1, TPS2115

Hi team,

  My customer has a few  questions for Settling time of TPS2115A(TPS2115A-Q1).

    1. Is settling time  a period  from detection over current to  protect　operation ? 

    2.  What  values for MIN and  Max of Settling time data. So typical value is only in data sheet.  

　　3． Is settling time value (1msec@TYP)  is  design spec?  

  Regards, Kenji Ito

  • 0
    TI__Mastermind 40600 points
    Ito-san,
    1. The settling time described in the datasheet is like a reaction time of the current limit circuit in the IC to limit the output current to within 10% of its set current limit value (set by ILIM resistor).
    2. Unfortunately, we do not have test data to determine min/max value.
    3. To date, I have not seen issue with overcurrent at system level for this device; however, I recommend checking TPS2115 EVM on customer system to see if the td spec affects their application. They can also add hotswap in series if faster protection is required.