Packet checksum mismatch

Ben Duvenage22

Expert 1250 points

Other Parts Discussed in Thread: BQ34Z100, BQSTUDIO

I have found the chemical file for my battery pack using bq34z100.

When I try to "update chemistry from database" using ev2300 using I2C

I get an error "packet checksum mismatch". Why?

Kind regards

Ben

over 9 years ago

0 ThomasCosby over 9 years ago

TI__Guru 73830 points

Ben
Are you using the bq34z100 or the q34z100-G1? If you are using the -G1, then what version of bqStudio are you using? Which ChemID are you trying to program?

Tom

0 Ben Duvenage22 over 9 years ago in reply to ThomasCosby

Expert 1250 points

Hi Thomas
using the G1
I got the chemical file for the battery. see my other post on the 4 questions.
I should have put them all together. Sorry......
Using Bat studio 1.3.45
Kind regards
Ben

0 Jagbir over 8 years ago in reply to Ben Duvenage22

Expert 1525 points

Hi,

I am also facing the exact issue. Does anyone knows how to solve this.

Thanks.

Jagbir

0 Ben Duvenage22 over 8 years ago in reply to Jagbir

Expert 1250 points

Make sure you have all the latest firmware on your devices

Power management

Power management forum

Packet checksum mismatch