Hi Sir
May we direct connect TPS562200 & TPS54239 enable pin to Vin? due to i check EVB, EVB have add 10Kohm resistor.
but my customer direct connect EN to Vin in PCB board.
Best regards,
Bogey
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
From the spec, EN voltage can up to 17V, so it should not have any problem.
However, it just a signal pin, it's better to have 10K resistor and then connect to VIN.
thanks!