This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS2113A EVM - About jumpers setting of the mode1 automatic switching

Guru 21045 points

Hi Team,

 

I would like to know about jumpers setting of “mode1 automatic switching”.

If jumper3 and 4 is open, VSNS pin is open.

Is this setting correct?



 

I understand that VSNS pin have to connect GND because VSNS pin is the input of comparator.

 


 

Regards,

Kanemaru