The TI E2E™ design support forums will undergo maintenance from Sept. 28 to Oct. 2. If you need design support during this time, contact your TI representative or open a new support request with our customer support center.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CSD18535KCS Pspice Error

Other Parts Discussed in Thread: CSD18535KCS

Hi,

I used the  CSD18535KCS.OLB  and CSD18535KCS.LIB models by adding them to the implementation line in the "MbreakN" Mosfet part. I'm using two of the CSD18535KCS Power Mosfets to create a push-pull driver. However, when I siimulate them in Pspice I get these errors:

*** I had to delete this information as it contained images of an unencrypted model on an external forum - Brett Barr***

Can someone explain why this is happening? I've attached files of the code and schematic in Pspice. Anything will help thanks!