Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 364 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC384-ADJ / Operation at overcurrent protection

ACGUY
Guru 11170 points
Other Parts Discussed in Thread: UCC384

Hi all,

Please let me know about UCC384.
If an overcurrent occurs,
  -  Does this device will stop?
  -  After the OCP, latch or retry?

Regards,
Nagai