Power management

Power management forum

State Resolved
Locked Locked
Replies 2 replies
Subscribers 62 subscribers
Views 1356 views
Users 0 members are here

Support feedback

Options

Options

Similar topics

Layout revision TPS64203 / PMP5412

user4517108

Prodigy 80 points

HI,
I am developing a source AC/DC non isolated with the following characteristics :
Vin = 120-230V.
Vout = 5V @ 750mA.
This layout is good? I have based on the PMP5412 . 
This PCB is only for tests, the final version will have reduced dimensions to fit inside a case.
All components are in compliance with the electrical characteristics mentioned in the BOM .

Thank you very much.

over 8 years ago

0 Robert Taylor1 over 8 years ago

TI__Expert 5845 points

Hi,

In reference to the layout shown, for the most part it looks good.

I would suggest moving the trace on the bottom to the top layer and place it around the outside of the GND fill.

Thanks,

Robert

0 user4517108 over 8 years ago in reply to Robert Taylor1

Prodigy 80 points

Hi Robert,

I updated my PCB. I moved the track as you requested .

Thank you very much.