How to set DODatEOC Delta T for BQ34Z100

user44411751

about "DODatEOC Delta T"parameter configuration,I only find "REMCAP = FullChargeCapacity – Qstart. As temperature decreases, Qstart can become
much smaller than that of the old FullChargeCapacity value".I want to know how to reasonable set "DODatEOC Delta T" parameters.

over 8 years ago

0 ThomasCosby over 8 years ago

TI__Guru 73830 points

The default setting for DODatEOC Delta T is 10 degC, so the gauge will force a simulation when the temperature changes by this amount. Most users leave it set to the default amount, but you could reduce it to 5 degC, if you see capacity reporting issues as the temperature changes.

0 user44411751 over 8 years ago in reply to ThomasCosby

Intellectual 940 points

thank you ThomasCosby，DODatEOC Delta T is Related to Qstar.

Power management

Power management forum

How to set DODatEOC Delta T for BQ34Z100