Looking on the bq25071-Q1, I have a LiFePo4 3300mAH Battery 3.2V with cahrging float at 3.6V, also I have system load of 340mA
I was wondering if I set ISET for 1000mA Charging and leave it set as this, what will happen if the charger IC is connected to a USB power which is only providing:
5V at 100mA
5V at 500mA
5V at 1500mA
Am I correct in thinking that the Charger IC will take what it can and pass it onto the battery and switch off the system load if its too little?