LMR23625CEVM: Shutdown Current

Kuramochi Tadahiko

Guru 28715 points

Part Number: LMR23625CEVM
Other Parts Discussed in Thread: LMR23625,

Hi,

I measured the shutdown current of two LMR23625"CF"s on the LMR23625CEVM.

(I replaced the only ICs.)

The result was around 20uA on these two samples.

Probably, The measuring way is correct because I confirmed it with my colleague.

Is the result value valid?

Best Regards,

Kuramochi

over 7 years ago

0 Kuramochi Tadahiko over 7 years ago

Guru 28715 points

How is this situation?

0 Kuramochi Tadahiko over 7 years ago in reply to Kuramochi Tadahiko

Guru 28715 points

How is this situation?

0 JohnTucker over 7 years ago in reply to Kuramochi Tadahiko

TI__Guru**** 191445 points

The shut down current for the IC should be in the range of 2 to 4 uA. That is for the IC alone. If you are measuring it on the EVM, there are other components present such as resistor divider for EN, input capacitors, etc. They may draw additional current. 20 uA seems reasonable to me.

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Power management

Power management forum

LMR23625CEVM: Shutdown Current