Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 64 subscribers
  • Views 259 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS62020: not getting constant 1.8V out

Berlin Joe
Prodigy 10 points
Part Number: TPS62020

Hi,

Currently i designed a circuit with tps62020 for deriving 1.8V from 5V. I designed as per the application circuit showed on the datasheet. On Multi meter it shows 1.8V 1.9V, After probing on CRo the output is not constant there is a spike on output. please suggest me what is the exact problem......

Thanks in advance