This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ27510EVM: GPOUT pin not response when Charge Inhibit occurring

Part Number: BQ27510EVM

I got a BQ27510EVM and try to use GPOUT pin to control charger enable.

When I heating the external thermistor, the temperature reading is correct.

And the [CHG_INH] bit is set high when temperature over 45 degrees Celsius.

But the GPOUT pin not deasserted to indicate this condition.

How to setup the 5 OpConfig data memory?