• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 714 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

REF3333: SC70 mechanical dwgs missing from DS?

John Garrett
Expert 4210 points
Part Number: REF3333

For REF3333AIDCK(R & T) only the physical dimensions of the SC70 are provided. The recommended pad layout is not. Is that information available? Thank you in advance for your assistance.  

 

Regards, John Garrett TI-AFA

  • 0
    TI__Intellectual 1540 points

    Hi John,

    We do not have a drawing available of the landing pattern for the SC70-3 package. We are looking into getting that made. 

    However, the datasheet for the TPS715 has the suggested landing pattern for the SC70-5 package, which is the same size with different pin configuration that can be used as a reference in the mean time.

    Regards, Diego Lewis