• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 1065 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UCC27211A-Q1: UCC27211A-Q1, Short-Time Input Pulse, Internal Level Shifter

TI Joern
Prodigy 575 points
Part Number: UCC27211A-Q1


Hello,

I am designing with UCC27211A-Q1. In case of very short timed inputs at HI with < 50 ns is there a chance that the falling-edge is missed by the gate driver leading to a stuck HO-output and possibly causing shoot-through ?

Thanks in advance.

  • 0
    TI__Prodigy 10 points
    Hello,

    The internal level shifter of UCC27211A-Q1 is not a “pulsed level shifter” and therefore is not dependent on edge-detection. That is why a stuck of outputs won’t happen even for short input pulses.
    However, inputs < 50 ns might be filtered out completely.

    Hope this helps.