• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 523 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3940: verify layout of LM3940IMPX-3.3/NOPB

Ravindra Balsaraf
Prodigy 50 points
Part Number: LM3940

Support Path: /Product/Help with Device Selection/

Dear sir ,

we are manufacturing automotive product

we would like to verify  LM3940IMPX-3.3/NOPB layout .

please find attached layout and schematic document.

Regards,

RavindraLM3940IMPX.docx7026.SCHEMATIC1 _ PAGE1.pdf

  • 0
    TI__Mastermind 23361 points
    Hi Ravindra,

    The connections have no problems. The input and output traces look a little bit thin to me; but I might be wrong as you did not provide the dimensions. If you plan to use this device to drive a large current, make sure to check your PCB spec and allow enough trace width corresponding to the current you plan to drive the device.

    Regards,
    Jason Song