• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 64 subscribers
  • Views 795 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS24720: TPS24720:

user5006944
Intellectual 630 points
Part Number: TPS24720

 When I use TPS24720 full load,there will be ladder up the phenomenon with the output 12V，38A.

  • 0
    TI__Expert 5940 points
    Go to www.ti.com/hotswap and download the design calculator tool. Looks like you have something set wrong. Are you 100% sure that you are not powering up into a high load? If you are, use the PG signal to allow downstream load turn on after Vout has risen to full value.

    Brian