My questions refers to document SLVUAD6 which is the user guide for the TPS650830EVM-095. The schematic on page 5 shows pin G12, FBVR2N, connected to a 100 ohm resistor, R22, and then to the ground pin of the output capacitors. Why is that resistor value 100 ohms and not 0 ohms? The rest of the resistors in the feedback paths are 0 ohms.
-
Ask a related question
What is a related question?A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
