BQSTUDIO: Import and write calibration data into DF

Maurizio Bonelli

Part Number: BQSTUDIO
Other Parts Discussed in Thread: BQ28Z610,Using bqStudio, 1.3.76, I have exported the DF data to a .gg file. The data should be the reference data to upload in the new BQ28Z610 when in production series. But when I import the data to flash them into a new BQ28Z610, the calibration data, present in the gg file, are not imported into the Calibration section. Are the Calibration data prevented to be changed by import file? How can I set a golden image of the DF data starting from the "well configured BQ28Z610" exported data? Thanks

over 7 years ago

0 Onyx Ahiakwo over 7 years ago

TI__Guru* 76230 points

Hi Maurizio
Your bqstudio must have been set to preserve the calibration parameters thereby preventing updates during file import. go to bqstudio-.windows->preferences->datamemory->import . Then delete calibration from the class names to be preserved.

Let me know if you have further questions.
thanks
Onyx

0 Maurizio Bonelli over 7 years ago in reply to Onyx Ahiakwo

Expert 1400 points

Thanks, now the import command uploads all data. Maurizio

Power management

Power management forum

BQSTUDIO: Import and write calibration data into DF