This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ40Z50-R1: Instruction on use of bqMTester for bq40z50-r1 programming and calibration

Part Number: BQ40Z50-R1
Other Parts Discussed in Thread: BQMTESTER, BQEVSW, BQ20Z80, BQ40Z50, BQPRODUCTION


I am attempting to setup bqMTester (HPA495) for automatic programming and calibration of the bq40z50-r1. The user guide (SLUU397A) does not appear to have been updated for this application and so I'm having some trouble.

1. Generate ROM File per SLUU397A - 4.2.1:

The bq40z50-r1 is not compatible with bqEASY in bqEVSW or TesterDFReader. What is the correct procedure to generate a ROM file for this fuel gauge?

2. StationSetup.exe Unlock Configuration per SLUU397A - 4.4:

Password entry "bq20z80" results in "Incorrect Password". Is this an incorrect password?

In addition to the questions I've posed above, it would be helpful to have general guidance on how to approach this setup, especially if it must deviate from the given user manual.

Thank you,