This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54394: PG1 and PG2 sink current capability

Part Number: TPS54394

Can TPS54394 PG1 and PG2 sink 10mA?

Our customer are thinking to use two LEDs, one LED cathode is connected to PG1 and another cathode is connected to PG2, and each LED anode is pull-up to VREG5 (pull-up resistor is 470 ohm).
Each LED current is about 10mA.

Best Regards,
Kohei Sasaki