• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 769 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

bq76PL455A-Q1

Tarun
Prodigy 150 points

Sir , 

If  I use only  bq76PL455A-Q1 ic and some mosfet for passive cell balancing and I am make my BMS then how to configure  bq76PL455A-Q1 for cell balancing, Means How l connect  bq76PL455A-Q1 ic with my laptop to configure with GUI means which Hardware I should use.

Sincerely

Tarun Singahal

  • 0
    TI__Genius 11480 points

    Tarun,

    Please refrain from repeat posts with the same questions - i have responded to the other two threads with answers.

    To use your laptop with our EVM, we  use a 5V  USB-FTDI cable  (TTL-232R-5V), which allows  the  PC GUI to communicate VIA  UART