Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
A related question is a question created from another question. When the related question is created, it will be automatically linked to the original question.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Joey, hello and thank you for your interest in Texas Instruments TI Designs. Your question will be forwarded to our Power Design Services team that originally designed it back in 2015. Please allow some time for a response (perhaps as late as early next week) as many of our Power Design Services team is on holiday break until next Tuesday, January 2nd.
In the test report, section 4, page 6, it is reported the screenshot of the output voltage, measured at no load (Iout = 0A), while the previous image shows the ripple during burst mode (@ Iout = 100mA).
