Tool/software: WEBENCH® Design Tools
i need 3.3V out put derived from 5v using LMZ10503,kindly share the design
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: WEBENCH® Design Tools
i need 3.3V out put derived from 5v using LMZ10503,kindly share the design
Hi Prakash,
From my understanding you want to step down 5V to 3.3V. What is your required Iout specification?
If you haven't already done so, the LMZ10503 product page has a WEBENCH Designer simulation tool on the far right of the page to allow customers to on-the-fly generate a design specific for their needs.
Linked is an example using the WEBENCH Designer Tool for an application where the nominal input voltage is 5V, output voltage of 3.3V, and output current of 3A.
Link: https://webench.ti.com/appinfo/webench/scripts/SDP.cgi?ID=318504E67860E744
Regards,
Jimmy Hua